- Heating Cables
- Self-Regulating Heating Cables
- Self-Regulating Heating Cable HTM
- Self-Regulating Heating Cable HTA
- Self-Regulating Heating Cable HTP
- Self-Regulating Heating Cable BTC
- Self-Regulating Heating Cable BTCe
- Self-Regulating Heating Cable BTX
- Self-Regulating Heating Cable BTXe
- Self-Regulating Heating Cable CTE
- Self-Regulating Heating Cable VTM
- Self-Regulating Heating Cable VTL
- Self-Regulating Heating Cable VTR
- Self-Regulating Heating Cable LTM
- Self-Regulating Heating Cable LTL
- Self-Regulating Heating Cable LTR
- Series-Resistance Heating Cables
- Mineral-insulated cables
- Self-Regulating Heating Cables
- Connection Technology
- Junction Boxes
- Explosion Proof Polyester Enclosure
- Junction Box ECO CB
- Junction Box for Heating Cable with Mineral Insulation
- Junction Box for Light Indication
- Junction Box for Power Cables Connection
- Junction Box for Self-Regulating Heating Cables to Power Connection
- Junction Box for Self-Regulating Heating Cables to Power Connection (UVK)
- Junction Box for Series Resistance Heating Cable
- Junction Boxes for Connection of Data, Control and Signal Cables
- Junction Boxes for Connection of Heating Cables with Mineral Insulation
- Junction Boxes for Light Indication and Connection of Heating Cables to Power Supply
- Junction Boxes for Self-Regulating Heating Cables
- Junction Boxes for Self-Regulating Heating Cables (3 and More Circuits)
- Junction Boxes for Series-Resistance Cables
- Junction Boxes for Three-Phase Series-Resistance Heating Cables Connection
- Cable Glands
- Connection Kits & Accessories
- Junction Boxes
- Commercial De-icing Systems
Electronic Temperature Controller РТ-300
Application Areas
Freeze protection of pipelines and vessel
Approvals
The electronic temperature controller is designed to maintain the temperature in the set range.
PT-300 is used in general-purpose industrial electric heating systems of pipelines and tanks, in de-icing systems, as well as for maintaining a positive temperature in control cabinets within the set temperature range. The required temperature range corresponds to the selected pre-programmed TST04 temperature sensor.
The sensor is programmed at the factory and cannot be reprogrammed.
The regulator, in conjunction with the connected temperature sensor TST04, maintains the temperature according to the factory setting and does not require any settings for installation and operation.
The on/off button allows to switch off the heating system when it is not needed.
- Easy operation
- Small size
- Max. switching capacity 8 A
- Maintenance of set temperature without additional adjustments
- Indication of power and heating status
- Parameter storage in non-volatile memory
- Relay changeover contact
| Temperature setting range | set by sensor TST04 |
|---|---|
| Supply voltage | ~220 V, 50 Hz |
| Power consumption | 0,5 W |
| Dimensions | 35×90×68 mm |
| Weight | 100 g |
| Operating temperature | +5 ... +45 °C |
| Relative humidity | 80 % |
| Degree of protection | IP20 |
| Mounting type | DIN rail, 2 modules |
| Type of temperature sensor* | TST04 |
| Maximum sensor distance from the controller | up to 100 m |
| Number of temperature measurement channels | 1 |
| Number of control channels | 1 |
| Switching capacity | 8 A |
| Temperature measurement accuracy | ±0.5 °C |
* The sensor is not included in the scope of supply and must be ordered separately.